32-bit standard serial main controller board SM-01-F5021
Product Characteristic
• 32-bit high performance industrial class ARM controller
• Double CPU structure, mutual monitoring between main and auxiliary CPU, enhancing the safety performances of the product
• Wide voltage suitable range of DC20～28V
• Adopts “safety chain” design in safety and door-lock inspection point
• District monitoring through isolated CAN, strong anti-interference
• Strong electromagnetic anti-interference ability (EFT- 4000V)
• Strong electrostatic anti-interference ability (ESD 8000V)
• Complies with EN81, GB7588 safety standard, passes CE, CSA certification
Functional Description
• Suitable for commercial lifts, residential lifts ,hospital lifts and observation lifts
• Suitable for 0.63～4m/s elevator control
• Maximum stops up to 64 stops
• Suitable for synchronous and asynchronous traction machine
• CANBus serial communication mode
• Analog speed and sectionalized speed given
• Compatible to different types of encoders
• Supports duplex and group control function
• Supports load-weighing compensation function
• Supports elevator IC card management function
• Supports district monitoring and remote monitoring
• Supports STEP standard hand-held operator
• 20 elevator fault records
32-bit high performance serial main controller board SM.01PA/D
Product Characteristic
• 32-bit high performance industrial class ARM controller
• Specially design for high speed elevator, the fourth level terminal speed switch is added.
• Speed signal is precisely given, with excellent riding comfort
•Double CPU structure, mutual monitoring between main and auxiliary CPU, enhancing the safety performances of the product
• Wide voltage suitable range of DC20～28V
• Adopts “safety chain” design in safety and door-lock inspection point
• District monitoring through isolated CAN, strong anti-interference
• Strong electromagnetic anti-interference ability (EFT- 4000V)
• Strong electrostatic anti-interference ability (ESD 8000V)
• Complies with EN81, GB7588 safety standard, passes CE、CSA certification
Functional Description
• Suitable for commercial lifts, residential lifts ,hospital lifts and scenic lifts
• Supports high speed elevator, highest speed up to 5m/s
• Maximum stops up to 64 stops
• Suitable for synchronous and asynchronous traction machine
• -10～+10V analog voltage output
• CAN Bus serial communication mode
• Analog speed and sectionalized speed given
• Compatible to different types of encoders
• Supports duplex and group control function
• Supports load-weighing compensation function
• Supports elevator IC card management function
• Supports tri-car door opening
• Supports district monitoring and remote monitoring
• LCD display operator, can display the system status and parameter, and display the real-time elevator speed curve
• Supports STEP standard hand-held operator
• 20 elevator fault records
16-bit serial main controller board SM-01-CD/A
Product Characteristic
• 16-bit high performance industrial class CPU
• Adopts “safety chain” design in safety and door-lock inspection point
• Wide voltage suitable range of DC20～28V
• Strong electromagnetic anti-interference ability (EFT- 4000V)
• Strong electrostatic anti-interference ability (ESD 8000V)
• Two independent brake switch detection points
• Complies with EN81, GB7588 safety standard,
Functional Description
• Suitable for commercial lifts, residential lifts ,hospital lifts and scenic lifts
• Suitable for 0.63～1.75m/s elevator control
• Maximum stops up to 32 stops
• Suitable for synchronous and asynchronous traction machine
• CAN Bus serial communication mode
• Analog speed and sectionalized speed given
• Compatible to different types of encoders
• Supports duplex control function
• Supports 7- segment commissioning interface on board, can perform elevator commissioning without other additional equipment, thus cost saving
• Supports load-weighing compensation function
• Supports STEP standard hand-held operator
• 20 elevator fault records
• Low cost solution, does not support group control and monitoring function
16-bit parallel main controller board SM-01DP/C
Product Characteristic
• 16-bit high performance industrial class CPU
• Wide voltage suitable range of DC20～28V
• Adopts “safety chain” design in safety and door-lock inspection point
• Strong electromagnetic anti-interference ability (EFT- 4000V)
• Strong electrostatic anti-interference ability (ESD 8000V)
• Simple and reliable hall call point extension method
• Compressing spring-type terminal, convenient for site wiring work
• Complies with EN81, GB7588 safety standard
Functional Description
• Suitable for goods elevator
• Maximum elevator speed up to 1.75m/s
• Maximum stops up to 15 stops
• Supports VVVF; two speed and hydraulic drive
• Parallel signal input
• Analog speed and sectionalized speed given
• Compatible to different types of encoders
• Supports duplex control function
• Supports district monitoring and remote monitoring
• Displays fault code in the fault indicator on board
• Supports STEP standard hand-held operator
• 20 elevator fault records
Home hydraulic lift controller board SM-01HO/B, SM-01HO/C
SM-01HO/B（CHINA）
SM-01HO/C（NORTH AMERICA）
Product Characteristic
• 16-bit high performance industrial class CPU
• Wide voltage suitable range of DC20～28V
• Strong electromagnetic anti-interference ability (EFT- 4000V)
• Strong electrostatic anti-interference ability (ESD 8000V)
· Excellent extensive ability, CAN connection point reserved.
· Compact size, convenient for installation
· Complies with the North America safety standard, past CSA certification
Functional Description
· Suitable for home hydraulic lifts
· Maximum stops up to 5 stops
· For elevator speed below 0.5m/s
· Supports hydraulic drive
· Parallel signal input
· Can perform commissioning and examine the system status using the operator on board
• Supports STEP standard hand-held operator
• 20 elevator fault records
|
